Flexible Coupling is designed for pipe connection and O-Ring for the Cooling Water Box.

• Cushion Bushing, O-Ring for the Cooling Water Box
• Seal Washer
• Flexible Coupling
• Prop Seal
• Scraper Seal
• Dust Seal
• Valve Seal
• SW
• MV Joint

• Rod Packing

• Cylinder Packing

Grease Seals are arranged to be directed in while the Dust Seal directed out for grease recycling, all the seals are designed to be plane contact sealing in order to avoid shaft abrasion and increase the life at the same time.

• DRT
• DYR
• Diaphragm
• DLF
• DL
• DWT
• DGC
• DGB
• DGK
• DO

Dust Seal on the neck is directed out for grease discharging while the seals on the ends are directed in. There are two layers of Dust Seal in which steel ring are embedded for preventing the seals stripped off from the bearing.

• DLF
• DG
• DL
• DWT
• DRT
• DY
• DYR

The arrangement is the same as Grease Discharging type, but the key point is to choose seals for establishing back pressure to designed extent in the choke.
The space is always narrow in the end position, thus DG type of seal is designed for the application.

• DYS
• DWT
• DWS
• DGA
• DRT
• DGK
• DY

One Cut type of Seal is designed to fit into Split Bearing which always installed in the middle of Pestle type of roll.

• SW

One Cut type of Seal is easier to install in gear box.

• SW
• DWT
• CS